New Products for February 2017

New Products for February 2017
January 30, 2017 Coleman Mcvea

1986-1995 Suzuki Samurai Cup Holder & Dash Mount Bracket

The Samurai is certainly not known for its luxury features.  These cars were without frills even by 1980s standards.  We wish Suzuki would have given us at least a few cup holders.

Modernize your Samurai with our dash mounted double cup holder.  This black powder coated bracket will secure your drinks when you need both hands for the trail.

Magnuson Toyota Tacoma MP90 Supercharger System

Magnuson is proud to announce the Toyota Tacoma Supercharger System is now available for the 2005-2015 Toyota Tacoma 4.0L V6. The OEM look of our integral supercharger system on this platform allows for a single large charge air cooler, a larger plenum and tapered runners just to name a few advancements. At around 6 psi, the Tacoma Supercharger System makes an amazing 305hp and 335lb-ft of serious truck torque at the crank, all with CARB certification (D-488-40).

Magnuson Toyota Tundra 5.7L V8 TVS1900 Supercharger System

Magnuson is proud to announce the Toyota Tundra Supercharger System is now available for the 2009-2017 Toyota Tundra 5.7L V8. The OEM look of the integral supercharger system on this platform allows for a single large charger air cooler, a larger plenum and tapered runners just to name a few advancements. At around 7 psi, the Tundra Supercharger System makes an amazing 550hp and 550lb-ft of serious truck torque at the crank, all with CARB certification (D-488-41). 

1995-2004 Toyota 5VZ-FE 3.4L V6 Supercharger Kit by Magnuson

Magnuson is proud to announce the Toyota 3.4L V6 Supercharger System is now available for the Toyota Tacoma, 4Runner, T100 and Tundra. The OEM look of the integral supercharger system on this platform allows for a one piece design, a larger plenum and tapered runners just to name a few advancements. At around 6 psi, the 3.4L V6 Supercharger System makes an amazing 25% hp and 25% lb-ft increase of serious truck torque at the crank, all with CARB certification (D-488-42).

2000-2006 Toyota Tundra | 2000-2006 Sequoia 2.5 Front Coilovers with Eibach Coils – 0-3″ Lift By Sway-A-Way

If you want to treat your Toyota to a lift kit, you have come to the right place. Read the forums, go on the trail, what is the best coil-over for the money?  Sway-Away has a name that is one of the best in the industry.  Low Range Off Road is here to bring you a quality product, read on to see what our testing found…Click on the image to the left to read more.

Toyota Extended Driveline Kit – 8″ Slip by Sumo Gear

Sumo Gear Company’s extended driveline kits are just what you need after a long travel suspension install.

Provides 8″ of slip.

Cut the tube from your existing drive line.  and replace with a length of .095 or .120 wall tubing. Set up the drive line so that you have 3″ slip showing at rest.

Applications: 1984-1995 Pickup & 4Runner

Smiling Bottle Opener Tube End Caps

We hope every wheeling trip goes well for you.   Wether you come out of the trail in one piece or towed behind three recovery vehicles, end on a happy note with your favorite beverage.

The Smiling End Tube Caps are a perfect way to finish off your fabrication work.

Welds into any 1.5″ I.D. Tube.   Opens any standard 21-tooth crown capped brewskie.

Suzuki 5×5.5″ Wheel Spacers

When you start running wider tires on your Suzuki your going to start running into your wheel well.  More width is also used to make the rig more stable off-road. This is one easy way to increase width and make your rig look better with a wider stance. 5×5.5″ bolt pattern. Each wheel spacer kit includes 2 Spacers and all Lug nuts needed.

1″ wide spacers are made by Spidertrax and come anadized in blue.

1.25″ spacers by Trail-Tough are bare aluminum.

1.5″ and 2″ spacers from Trail-Gear are black.

2007-2017 Toyota Tundra Front Brake Rotor | X-Drilled

2007-2017 Toyota Tundra Front Brake Rotor | X-Drilled (TUN-BR-XD-07)

Cross Drilled Rotors for Tundra. Great way to make your Ride Look and Perform well. Dirrect Replacement Rotor.

Rotors are finished with black e-coating on both sides of the hat, inside the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.

Suzuki Samurai Ultimate Spartan Locker Package

Low Range Off-Road wants you to make shopping for your Samurai a step easier.  Are you considering re-gearing your Samurai axles? In terms of off-road capability for the dollar, there is no better modification than a traction/gear package.

Your stock 3.73 ring and pinion gears are fine for 27″ tires.  With larger tires you will need to re-gear.  4.57 gears are a 23% reduction while 5.38 are 44% lower than stock.

A re-gear is a perfect time to install a locking differential for added traction in rough terrain.  The Spartan locker is our recommendation because the hard facts are that it just cant be beat.

 

2010-Present Toyota 4Runner Old Man Emu Suspension Lift Kit – Heavy Load 3″

2010-Present Toyota 4Runner Old Man Emu Suspension Lift Kit – Heavy Load 3″ (OME4RU10HKSB)

Take the the guess work out of ordering your Old Man Emu customized suspension system by ordering this complete kit with a single part number. This complete Old Man Emu suspension kit is designed to accommodate the additional weight of an aftermarket front bumper and winch, as well as the weight of a rear bumper and all your camping gear. This kit achieves approximately 2.5 – 3″ of lift. If you do not have any additional weight on your vehicle, this suspension will be extremely stiff with a much firmer ride than intended.

0 Comments

Leave a reply

Your email address will not be published. Required fields are marked *

*